• EMAIL : Analogik Electronics Corporation

Signal Isolators / Signal Converters

We are Manufacturer, Supplier of Signal Isolators – Series – 405, 406, Signal Converters and our setup is situated in Pune, Maharashtra, India.

Signal Isolator

 

Request a Quote
Download PDF

Signal Isolator – Series – 405, 406

Features

  • Eliminates ground loop problems
  • Accepts signals from field sensors
  • High accuracy & Low Temp. drift
  • Many versions available with bipolar input & output
  • 2, 4, 8, 16 channels module available
  • High response time on request (2-10 ms)
  • Long functional life
  • Power CN – indication by LED

Applications

  • To eliminate the noise coming from field sensors, motors, due to wiring
  • To isolate field instruments from costly instruments like SCADA, DCS, PLC, controllers etc.
  • To distribute the signal in 2, 3, 4 outputs
  • To increase the noise immunity of systems
  • For impedance matching of field instruments and panel instruments
  • To use as multiplier / repeaters

Technical Specifications

  • Input : 0/4 to 20 mA, 0/1 to 5 VDC, 0 – 10 V DC Pt100, Thermocouples, 0 – 5 AAC mV from load cell, frequency etc.
  • Output : 0/4 to 20 mA, 0 – 10 V, mV
    retransmission output 24VDC, 50mA, AUX. o/p.
  • Supply : 230 V AC, 110 V AC, 50 Hz, 24 VDC 12 V DC, 48 V DC etc.
  • Accuracy : 0.2 % of F.S.
  • Isolation : Three part isolation between I/P-U/P, I/P – supply. O/P – O/P 1.5 kv AC, 60 sec, Galvanic isolation
  • Operating Temp & Humidity : 0 – 50oC, 90 % Rh NC
  • Zero / Span Adj. : By trim pot at front focia
  • Auxiliary output : 24 V DC/12 V DC/10 V DC, 30 mA
  • Input Load : 100 Analogik Electronics Corporation
  • Output Load : 500 max hr. 0/4 to 20 mA
    100 Analogik Electronics Corporation min hr. 0 – 10 V DC
  • Temp. Drift : 200 PPM
  • Mounting : DIN rail – 35 mm DIN
  • Dimensions : 70 x 60 x 110 mm (H x W x D)
    70 x 100 x 110 mm (H x W x D)
  • Weight : 1 to 1.5 kg. Approx
  • Power Consumption : Less than 5 VA
  • Protection : IP 20

Dimensional & Electrical Connections

Analogik Electronics Corporation

e.g. Signal Isolator Model – 405 having 1 I/P (4 – 20 mA) – 20 IPS (4 – 20 mA) Auxiliary output – 24 V DC, P/S – 230 volt – 60 DC 15 405 – 110 – 21100 – 0 – 1

Ordering Information