UNIVERSAL CALIBRATORS AND SIMULATORS

Features :
Green display 1/2" height.
High accuracy & reliability.
Easy to operate.
UNIVERSAL CALIBRATORS AND SIMULATORS   calibrator
UNIVERSAL CALIBRATORS AND SIMULATORS

 
 
 
 
 
 
INTRODUCTION
Analogik universal calibrator is very useful tool to calibrate many types of process control instruments which accepts mV and mA and resistance. The universal calibrator is designed to give highest stability and accuracy. The calibrator can be used for lab or inhouse purpose as well as to used on field. This is very useful tool for calibration of instruments, commissioning, quality assurance and fault findings.

TECHNICAL SPECIFICATIONS
FUNCTIONS
mV, mA Resistance source
mV, mA Read
RANGES
0 to 200 mV
0 to 25 mA
0 to 500V
INDICATION
4 1/2 digit LCD / LED - Green
mV, mA and V or °C
POWER SUPPLY
230V AC, SOHz for table top model
2 Batteries of 9 VDC
for portable model
RESOLUTION
10 uVformV
0.01 mA
0.1 V or 0.1 °C
ACCURACY
0.1 % of FS 0.15% of FSformA
0.2 % of FS for RTD
OPERATIONGTEMP & HUMIDITY
10to50°C, 90%Rhmax
BATTERY LIFE
6 hrs. incase of full o/p currect
30 hrs. when no o/p current 90
SIZE
WEIGHT
90 (H) x 215 (W) x 230 (D) mm
2 kg (Table Top) 1 kg (Portable)
DOWNLOAD
THIS PAGE
DOWNLOAD THIS PAGE

FUNCTIONAL DESCRIPTION
Power on switch - Powers the instruments with indication.
Coarse & Fine Pot - Both the potentiometers are multiturn helipots & used to adjust the correct value on display.
Res. Adjust Pot - Mult! turn Helipot to adjust the correct value of resistance.
Read / Source Switch - Push to ON switch. When in press condition parameters will be in READ mode when unpress mV / mA in source mode.
mV / mA switch - This switch selects the parameter mV or mA either read or source.
RTD Switch - When this switch is pressed display shows temp, in °C and as per resistance chart (DIN - 43760) corresponding resistance will be source when switch is relased.
 
When switch is in press condition output at R and B/C terminals is in open (infinity resistance) mode.
Display - Green, 1/2" height, common to read all the parameters
CALIBRATION EQUIPMENTS
mV / mA Source
RTD Simulators
mV Source
pH Simulator
Conductivity Simulator
RTD Simulator with Indication
 
Portable Thermocouple Calibrator
Loop Analyser

DIMENSIONAL & ELECTRICAL CONNECTIONS
DIMENSIONAL & ELECTRICAL CONNECTIONS




Home | Profile | Digital Process Indicators | Digital Temperature Controller | Temperature Scanner | Portable Temperature Indicator | Temperature Transmitter | Ph Indicators | Ph Transmitters | Level Indicators | Level Transmitters | Flow Indicating Totaliser | Signal Isolator | Universal Calibrators | Digital Timers | Flameproof Instruments | Contact | Feedback

Designed by : MID   Hosted by : GID   Promoted by : PBD