DIGITAL TIMERS


FEATURES
UP/Down timer
Cyclic ON-Off timer – possible – when connected in loop
Retrigger – input – potential free input
Timing in ms, sec, min & hrs.
Crystal based micro controller design – with high accuracy

TECHNICAL SPECIFICATIONS
INPUT
Pe-trigger input – potential free contact
UP – DOWN
timer setting – through Front keyboard
3) Tiuming – in min/sec/ms
Or hr/min/sec
Accuracy – digit
Selection by keyboard
Display
6 digit, 0.36” height, Red LED
Cyclic timer mode
Relay O/P pulse to be given to retrigger input
ON-OFF time mode
Selection by keyboard
On timing & Off timing
Settable through keyboard independently
Power ON
Delay or power off delay possible - settable through keyboard.
Power supply
10V AC / 230WA, 5HZ
Dim
72 x 72 x 100mm
Mounting
Panel mounted type



DIGITAL PULSE COUNTER / PRESET COUNTER


FEATURES
Micro controller based design with 4 keys
Display 6 digit and 8 digit
Relay output – one change over – 5 Amp @ 230 WAT
Input signal from proximity switch, limit switch or optical pick-up
LED indication for relay ON
Reset through keyboard
Digital display with VP counting
Hi-speed & L0 speed counting
TECHNICAL SPECIFICATIONS
INPUT
Pulse input & max 24 VAC
Accepts potential free contact
Display
8 digit / 6 digit 0.36” height
Relay ON – By LED
3) Reset
Through Front switch
4) Battery Back-up
ON power failure the data will be stored & count starts from the same as soon as power comes
5) Set point settings
Through Front keyboard
6) Power supply

110 V AC / 230VAC, 50HZ, 1 O
7) Dim
72 x 72 x 100 mm
8) Mounting
panel mounting type

FLAMEPROOF INSTRUMENTS
FLAMEPROOF TEMP. INDIACATOR / TEMP. COUNTROLLER


FEATURES
CMRI Certified Flameproof enclosure – for Gr. I, IIA & IIB
Dual Chamber – Electronic & Termination Chambers
Display – ½” LED or 1” LED
Built in ambient compensation & three wire lead compensation
T/C & RTD input
Wall mounting type with epoxy painted
Weight 5 kg approx.
On line set point adjustments

FLAMEPROOF TEMP. SCANNER


FEATURES
CMRI certified flame proof enclosure for GR I, IIA & IIB
Accept T/C pt100 ilp5
Max. No. of channels – 8
Single chamber for beth.
Display – ½” height LED / or 1” height LED
Auto / manual & Manual Ch. Select button outside
User accessible – Time POT inside
Wall mounting type with epoxy painted

FLAMEPROOF TEMP. SENSOR / TRANSMITTERS

FEATURES
CMRI certified flame proof enclosure for GR I, IIA & IIB
2 wire temp. transmitter – all specifications as per 2 wire temp. transmitter
Sensor length & outer diameter aw per requirement
Process connection as per requirement.

FLAMEPROOF LOOP POWERED INDICATOR FLAMEPROOF TEMP INDICATING TRANSMITTER

FEATURES
FLAMEPROOF MULTIPOINT TEMP. INDICATOR
FLAMEPROOF FLOW INDICATING TUTALISER
FLAMEPROOF PROCESS INDICATOR – PH / LEVEL / CONDUCTIVITY

Home | Profile | Digital Process Indicators | Digital Temperature Controller | Temperature Scanner | Portable Temperature Indicator | Temperature Transmitter | Ph Indicators | Ph Transmitters | Level Indicators | Level Transmitters | Flow Indicating Totaliser | Signal Isolator | Universal Calibrators | Digital Timers | Flameproof Instruments | Contact | Feedback


Designed by : MID   Hosted by : GID   Promoted by : PBD